North Germany

Everything related to creation of new sceneries for Condor...

Moderators: Uros, OXO, GR, ASH33M

User avatar
Maddin91
Posts: 218
Joined: Thu Oct 26, 2006 3:37 pm
Contact:

Re: North Germany

Postby Maddin91 » Sat Sep 20, 2014 5:21 pm

In Condor/CondorSceneryToolkit open the config file and change that Max resolution from 128 to 2048 :D
Now in Working/Textures/Small rename or delete the tiles you want in higher resolution.
CST always creates small texture files in this folder according to the setting if necessaty
M. Lonien | Reg: D-2101 | CN: MAL
Image

tarn
Posts: 9
Joined: Mon Dec 23, 2013 11:21 pm

Re: North Germany

Postby tarn » Sat Sep 20, 2014 6:18 pm

Hi Martin,

Thank you again, it works! :D You have given me so much help. Now I can align the airport more accurately. My runway was about 2 degrees mis-aligned. Now I will keep on testing and learning.

Best,
Tim

User avatar
Capricorne
Posts: 207
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: North Germany

Postby Capricorne » Sat Sep 20, 2014 10:07 pm

Sorry Tim, I was in Corsica.....
But, Thanks Martin you get the solution :)
This is a post from 2012 about this subject in French forum:
Capricorne wrote:salut Xavier,
Bien venue dans le monde de AptCndrX :lol:
Tu vas te faire un plaisir de placer tes "condors" en vol, puisqu'on peut aussi choisir l'altitude des "objets ".... :wink:
Moi j'ai un peu de mal à l'apprivoiser à cause du calibrage de départ, mais c'est incontestablement un outil qui mérite d'être plus utilisé.
Comme tu n'utilises pas de tuiles "photos" pour tes scènes, les petits décalages que j'ai mentionnés plus haut dans le sujet ne devraient pas t'affecter.
Pour y remédier, je ne sais pas si cela a déjà été mentionné, on peut bidouiller le fichier settings.ini du CondorSceneryToolkit, il faut changer la valeur de "MaxTextureSize" et la passer de 128 à une valeur plus grande comme cela: Image
puis effacer dans le dossier " working" toutes les textures "small"(ou juste celle/s que l'on veut changer) et re-ouvrir la scène dans LandscapeEditor ( la valeur mise doit être un niveau plus petite que la taille des textures.bmp . Dans mon exemple ci-dessous, la tuile de Sollières fait 4096x4096 , j'ai donc mis 2048 dans le settings.ini,
En mettant la même valeur cela n'a pas l'air de fonctionner.
Image
C'est quant même bien plus facile de positionner ainsi la piste et les objets précisément sur des images HD, sur la droite de mon image on voit la résolution standard LandScapeEditor de la tuile d'à coté... :shock:
Un grand merci renouvelé à Christian pour son outil.
Patrice.


or middle of this page : http://www.condorsim.fr/communaute/topic8462-30.html

Just to know , do not try do make this for a whole scenery! there is a 2 GB limit somewhere in small textures folder

Patrice

User avatar
Capricorne
Posts: 207
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: North Germany

Postby Capricorne » Tue Sep 30, 2014 7:34 pm

Hi all,
Latest news..All the requested Airports, mainly just "Glider Places" have been added.. :

"Gutersloh"
"Bad_Essen"
"Oeventrop"
"Montabaur"
"Butzbach"
"Oelde-Bergelerenau"
"Ober-Morlen"
Thanks to "Lukas" for informations about these places. :wink:
All Runways adjusted..
Image

Image

Image

Image

Image

Image

Image

I can now work a little in 3D..... :wink:

Regards,
Patrice

User avatar
Capricorne
Posts: 207
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: North Germany

Postby Capricorne » Wed Oct 01, 2014 5:53 pm

Thanks to all who send me request for airfields.. :wink:
To avoid the same suggestions again and again, here the very last list of airports and airfields now in scenery. :D
Also, I think it's better to make request here than by PM; have only to reply onces.. :D

Code: Select all

*******************************************************************************
========= E:\Pati_jeux\Condor\Landscapes\North-Germany\North-Germany.apt
*******************************************************************************
"Mendig",,,5021.912N,00718.954E,505m,5,76,1600,0,
"Ganderkesee",,,5302.148N,00830.372E,26m,5,79,800,0,
"Bremen_Neustadt",,,5302.794N,00847.448E,2m,5,88,2500,0,
"Lemwerder",,,5308.552N,00837.464E,2m,5,155,1800,0,
"Grosse_Hoehe",,,5259.159N,00834.395E,16m,5,39,960,0,
"Oldenburg-Hatten",,,5304.101N,00818.786E,8m,5,61,800,0,
"Osterholz-Scharbeck",,,5312.794N,00848.661E,1m,5,135,800,0,
"OerlingHausenG",,,5155.886N,00840.001E,165m,5,39,1000,0,
"Koblenz",,,5019.480N,00731.734E,197m,5,58,960,0,
"Bonn-Hangerlar",,,5046.110N,00709.816E,60m,5,290,800,0,
"UL-Weilerswist",,,5043.110N,00651.017E,137m,5,212,500,0,
"Bad-Neuenar",,,5033.438N,00708.220E,203m,5,286,500,0,
"Moenchsheide",,,5030.444N,00715.366E,205m,5,278,700,0,
"Lewerkusen",,,5100.838N,00700.432E,45m,5,150,690,0,
"Langenfeld",,,5108.418N,00659.178E,84m,5,253,800,0,
"Dusseldorf-Wolfsaap",,,5115.858N,00651.270E,113m,5,71,920,0,
"Bielefeld",,,5157.855N,00832.727E,138m,5,290,650,0,
"Detmold",,,5156.412N,00854.306E,190m,5,90,500,0,
"Bad_Pyrmont",,,5157.942N,00917.508E,500m,5,42,545,0,
"Porta-Westfalica",,,5213.260N,00851.606E,44m,5,57,600,0,
"Rinteln",,,5210.494N,00903.246E,53m,5,290,600,0,
"Wiefelstede",,,5319.251N,00804.470E,5m,5,122,590,0,
"Oostwold",,,5312.513N,00702.040E,3m,5,247,850,0,
"Leer Papenburg",,,5316.299N,00726.586E,1m,5,80,1100,0,
"Alte Ems",,,5301.830N,00718.354E,0m,5,103,790,0,
"Dierdorf-Wienau",,,5033.915N,00739.192E,287m,5,76,500,0,
"Marienberg",,,5039.624N,00801.680E,200m,5,107,760,0,
"Breitscheid",,,5040.560N,00810.158E,550m,5,253,875,0,
"Hirzenhain",,,5047.238N,00823.580E,521m,5,294,750,0,
"Siegerland",,,5042.452N,00804.950E,793m,5,308,1580,0,
"Bottenhorn",,,5047.676N,00827.533E,514m,5,283,840,0,
"Schameder",,,5059.988N,00818.615E,546m,5,100,700,0,
"Meiersberg",,,5117.946N,00657.426E,145m,5,126,850,0,
"Essen-Muelheim",,,5124.101N,00656.244E,125m,5,68,1100,0,
"Dorsten-am-Kanal",,,5139.697N,00659.141E,30m,5,91,680,0,
"Loemuehle",,,5138.813N,00709.907E,70m,5,74,680,0,
"Dortmund",,,5131.112N,00736.912E,120m,5,62,1390,0,
"Arnsberg",,,5128.986N,00753.910E,239m,5,50,920,0,
"Hamm_LippeWiesen",,,5141.393N,00749.136E,57m,5,60,620,0,
"Melle_Groenegau",,,5212.026N,00822.878E,72m,5,90,800,0,
"Damme",,,5229.227N,00811.159E,44m,5,104,700,0,
"Haxterberg",,,5141.274N,00846.566E,241m,5,62,900,0,
"Lippspringe",,,5147.358N,00847.063E,132m,5,229,710,0,
"Bueren",,,5132.526N,00834.860E,277m,5,75,700,0,
"Lippstadt",,,5136.810N,00837.008E,210m,5,57,2100,0,
"Muenster_Telge",,,5156.640N,00746.473E,53m,5,95,640,0,
"Blomberg",,,5155.008N,00906.696E,153m,5,63,540,0,
"Waldeckk",,,5113.504N,00903.355E,400m,5,185,500,0,
"Huensborn",,,5055.686N,00753.951E,401m,5,89,750,0,
"Bergneustadt",,,5103.090N,00742.474E,485m,5,219,630,0,
"Attendorn-Finnentrop",,,5108.694N,00756.217E,302m,5,34,500,0,
"Wershofen",,,5027.048N,00647.052E,470m,5,250,650,0,
"Dahlemer_Binzz",,,5024.356N,00631.774E,578m,5,60,1000,0,
"Reichelsheim",,,5020.262N,00852.764E,120m,5,358,1250,0,
"Nidda_Helmsbergggggg",,,5024.282N,00859.328E,165m,5,40,780,0,
"Fulda_Jossa",,,5028.475N,00926.586E,475m,5,81,600,0,
"Johannisau",,,5032.157N,00939.755E,253m,5,235,520,0,
"Krefeld ",,,5123.052N,00635.248E,41m,5,65,650,0,
"Grefrath ",,,5120.010N,00621.622E,30m,5,68,580,0,
"Bergheim",,,5058.608N,00636.523E,68m,5,139,1100,0,
"Seedorf",,,5320.112N,00915.630E,18m,5,58,800,0,
"Rotenburg",,,5307.722N,00920.991E,28m,5,80,760,0,
"Westertimke",,,5315.072N,00906.594E,35m,5,57,740,0,
"Huettenbusch",,,5317.179N,00856.931E,1m,5,90,500,0,
"Karlshoefen",,,5319.950N,00901.758E,5m,5,114,700,0,
"Weser_Wumme",,,5303.215N,00912.563E,19m,5,177,800,0,
"Lauenbruck",,,5312.447N,00934.438E,32m,5,110,640,0,
"Walsrode",,,5253.267N,00936.035E,58m,5,255,530,0,
"Verden_Scharnhorst",,,5257.894N,00917.025E,44m,5,123,520,0,
"Hodenhagen",,,5245.825N,00936.846E,24m,5,30,1200,0,
"Hoya",,,5248.680N,00909.900E,14m,5,123,680,0,
"Nienburg_Holzbalge",,,5242.560N,00909.738E,23m,5,84,830,0,
"Varrelbusch",,,5254.496N,00802.592E,32m,5,88,840,0,
"Diepholz_Dummerland",,,5235.106N,00820.484E,35m,5,86,1200,0,
"Nordhorn_Lingen",,,5227.435N,00711.135E,25m,5,236,900,0,
"Emden",,,5323.460N,00713.674E,0m,5,74,990,0,
"Westerstede",,,5317.304N,00755.890E,8m,5,67,580,0,
"Hellingst",,,5322.481N,00851.054E,20m,5,308,980,0,
"Elz-EDFY",,,5025.560N,00800.664E,213m,5,254,600,0,
"Ailertchen",,,5035.553N,00756.754E,470m,5,37,620,0,
"Giessen",,,5032.619N,00835.482E,230m,5,70,680,0,
"Bad_SassendorfffffffZZZZZ",,,5134.659N,00812.924E,120m,5,71,800,0,
"Gustorfer_Hoehee",,,5104.566N,00632.889E,85m,5,89,920,0,
"Erkelenz_Kuekhovenn",,,5103.858N,00621.614E,86m,5,156,480,0,
"Kleve_Wisselerr",,,5146.098N,00617.940E,15m,5,50,600,0,
"Wesel_Romerwardtt",,,5139.693N,00635.832E,19m,5,90,780,0,
"Kamp-Lintfort",,,5131.716N,00632.177E,22m,5,254,800,0,
"Duren-Hurtgenwaldd",,,5041.605N,00625.170E,350m,5,58,880,0,
"Aachen-Diepenlinchenn",,,5046.136N,00616.907E,264m,5,32,600,0,
"Vledderveen_EHST",,,5259.784N,00701.374E,1m,5,56,600,0,
"Stadtlohn-Vreden",,,5159.718N,00650.460E,46m,5,288,800,0,
"Altena",,,5118.720N,00742.250E,470m,5,63,520,0,
"Moenchengladbachh",,,5113.787N,00630.312E,37m,5,131,1180,0,
"Eudenbach",,,5040.299N,00721.949E,300m,5,90,900,0,
"Borkenbergead.wikimedia.org/wiki",,,5146.763N,00717.305E,49m,5,78,700,0,
"Rheine-Eschendorf",,,5216.578N,00729.616E,40m,5,287,900,0,
"Fritzlarrmany",,,5106.825N,00917.214E,170m,5,299,900,0,
"Mosenberg",,,5103.732N,00925.379E,398m,5,71,500,0,
"Bad Hersfeld*",,,5050.678N,00942.441E,277m,5,5,600,0,
"Lauterbach",,,5040.977N,00924.719E,362m,5,70,660,0,
"Gelnhausen*",,,5011.827N,00910.121E,125m,5,260,800,0,
"Gedern",,,5025.870N,00911.650E,330m,5,230,450,0,
"Salland",,,5228.068N,00620.002E,4m,5,93,1000,0,
"Dankern",,,5248.120N,00709.657E,12m,5,277,380,0,
"Meppen",,,5243.356N,00719.608E,18m,5,236,600,0,
"Steinberg",,,5257.360N,00733.420E,25m,5,273,900,0,
"Achmer6234°",,,5222.608N,00754.849E,52m,5,69,920,0,
"Arnsberg-Ruhrwiesen",,,5123.166N,00803.696E,183m,5,348,560,0,
"Allendorf_Eder",,,5102.071N,00840.860E,346m,5,293,1000,0,
"Barssel",,,5309.837N,00747.736E,1m,5,301,750,0,
"Betzdorf-Kirche",,,5048.990N,00749.872E,344m,5,253,600,0,
"Brilon",,,5124.126N,00838.598E,458m,5,66,600,0,
"Hessisch_Lichtenau*",,,5111.293N,00944.621E,412m,5,91,850,0,
"Hoelleberg",,,5136.629N,00923.946E,248m,5,77,500,0,
"Hoexter_Holzmindenn",,,5148.381N,00922.722E,284m,5,313,700,0,
"Iserlohn-Rheinermark",,,5125.728N,00738.706E,194m,5,250,700,0,
"Iserlohn-Suemmernn",,,5126.148N,00742.054E,154m,5,223,750,0,
"Kassel_Calden_Old",,,5124.432N,00922.476E,272m,5,41,700,0,
"Korbach",,,5115.146N,00852.475E,388m,5,212,600,0,
"Marburg-Schoenstadt",,,5052.403N,00848.930E,252m,5,212,800,0,
"Schmallenberg",,,5109.660N,00815.729E,470m,5,94,750,0,
"Schuren",,,5118.147N,00814.382E,434m,5,38,600,0,
"Radevormwald-Leye",,,5112.960N,00722.986E,388m,5,90,500,0,
"Plettenberg-Hulinghausen",,,5111.486N,00747.430E,302m,5,101,460,0,
"Meinerzhagen",,,5105.933N,00735.883E,470m,5,74,800,0,
"Wolfhagen",,,5118.384N,00910.560E,309m,5,149,535,0,
"Zierenberg",,,5122.080N,00920.158E,420m,5,190,400,0,
"Wipperfurthhame {",,,5107.440N,00722.329E,265m,5,291,650,0,
"Siegen-Eisernhardt",,,5050.225N,00800.813E,390m,5,96,500,0,
"Lunen-Lippeweidenn",,,5136.993N,00730.096E,48m,5,270,1000,0,
"Werdohl-Kuntroppp",,,5117.808N,00749.079E,312m,5,246,640,0,
"Pohlheim",,,5031.886N,00844.016E,236m,5,83,700,0,
"Mengeringhausen",,,5122.541N,00858.907E,359m,5,305,500,0,
"Bisperode-West",,,5204.686N,00928.608E,173m,5,61,1000,0,
"Uslar",,,5139.696N,00936.354E,250m,5,245,500,0,
"Vinsebeck-Frankenberg",,,5150.718N,00900.840E,245m,5,180,800,0,
"Warburg",,,5129.844N,00905.225E,172m,5,128,850,0,
"Dehausen",,,5127.789N,00902.982E,304m,5,161,640,0,
"Osnabruck-Atterheideeeeeeeeeee",,,5217.166N,00758.233E,88m,5,91,800,0,
"Quakenbruck",,,5239.801N,00755.460E,22m,5,283,790,0,
"Menden-Barge",,,5127.564N,00750.280E,218m,5,236,430,0,
"Bad_Zwischenahn",,,5312.591N,00759.394E,9m,5,266,900,0,
"Enschede-Twente",,,5216.069N,00653.233E,30m,5,112,1200,0,
"Borken-Hoxfeld",,,5151.150N,00648.942E,45m,5,120,860,0,
"Nörvenich",,,5049.860N,00639.360E,105m,5,69,1300,0,
"Waterkant-Zetee>>>>>>>coding="UT",,,5325.080N,00754.312E,4m,5,55,980,0,
"Gutersloh",,,5155.416N,00818.096E,66m,5,90,400,0,
"Bad_Essen",,,5221.048N,00819.731E,44m,5,102,650,0,
"Oeventrop",,,5123.733N,00808.712E,214m,5,118,450,0,
"Montabaur",,,5025.398N,00749.832E,255m,5,230,545,0,
"Butzbach",,,5026.112N,00837.290E,335m,5,101,670,0,
"Nastätten",,,5011.837N,00753.386E,366m,5,84,930,0,
"Oelde-Bergelerenau",,,5149.812N,00810.533E,82m,5,61,640,0,
"Ober-Morlen",,,5021.695N,00842.756E,248m,5,228,720,0,
"Hörbach",,,5040.056N,00815.642E,323m,5,237,340,0,
"Asslar",,,5035.959N,00826.667E,222m,5,354,430,0,
"Braunfels",,,5031.526N,00823.553E,242m,5,71,430,0,



Don't take care to "strange" spelling for some airfield name , it's a bug from .apt file encoding in "LandscapeEditor"... but will not appear in Condor.

User avatar
Capricorne
Posts: 207
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: North Germany

Postby Capricorne » Fri Oct 10, 2014 8:51 am

Hi,
Since above post, I have add the following Airfields:

Code: Select all

"Riedelbach",,,5018.090N,00823.106E,512m,5,53,765,0,
"Neu-Anspach",,,5017.241N,00832.052E,333m,5,57,980,0,
"Alsfeld",,,5044.997N,00914.952E,294m,5,55,625,0,
"Amoeneburg",,,5047.412N,00854.558E,226m,5,236,410,0,
"Der Ring-Ziegenhain",,,5054.390N,00914.618E,210m,5,209,550,0,
"Der Dingel-Hofgeismar",,,5132.268N,00923.112E,209m,5,230,300,0,
"Buckeburg-Weinberg",,,5215.043N,00900.900E,77m,5,107,1000,0,
"Morschenich",,,5052.390N,00633.150E,104m,5,68,320,0,
"Wanlo",,,5106.014N,00623.620E,75m,5,267,530,0,
"Hagen-Hof-Wahl",,,5118.419N,00725.606E,390m,5,273,380,0,
"Homberg",,,5044.826N,00901.296E,350m,5,221,400,0,
"Hohenrodskopf",,,5030.057N,00913.392E,660m,5,75,840,0,
"Reiskirchen",,,5033.942N,00852.199E,212m,5,37,440,0,
"Bad_Wildungen",,,5105.607N,00908.939E,321m,5,192,910,0,



To add place like :
Plaetzer“,,,50.710249, 9.739093
Wasserkuppe“,,,50.498872,9.954727
or„Bad Langensalza“,,,51.131847, 10.614304“
as requested by some people like , Ikarus *
I need to extend a little the scenery to east..... because they are to near from east limit to create an airport where you can start.
You can see them but not use them.....it's a Condor Limitation. :(
So again , I need your help for the specific problem from page 1.. How to move all objects rapidly...???

Capricorne wrote:
arneh wrote:
I had about 10 000 objects I needed to move between Southern Norway 1 and 2. Obviously I didn't move them manually one by one :-) .../...

It's not trivial to do, but it can be done without too much work.


That's a good news :D
Renaming all the dds was not that difficult, I had just to change all the xx-yy to (xx+12)-yy :D , BUT understanding the scenery.obj structure to move all object is something I have not try for now.
If I want the object shadow to be again at the exact place, the moving must be exactly the same distance than extension.....
Hope to make this for V2 but, I have still enough work on V1 .... :wink:


arneh Can you give me some tips for this ? I don't find myself how to tweak the .obj file...

WasserKuppe: :) :)
Image

I want to land here...

Best regards,

Patrice

Superphilipp
Posts: 3
Joined: Tue Oct 01, 2013 7:51 pm

Re: North Germany

Postby Superphilipp » Sun Nov 16, 2014 9:12 pm

Hi there!

Is this project still happening? This is the first Condor scenery where my home airfield is pretty much in the middle so I have been flying around in it pretty much exclusively for the past few weeks ... and I love it!

I even started adding towers and wind turbines taround my home to match my ICAO map. If you need any help with the more tedious parts, maybe I can help out?

User avatar
Capricorne
Posts: 207
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: North Germany

Postby Capricorne » Mon Nov 17, 2014 12:05 am

Superphilipp wrote:Hi there!

Is this project still happening? This is the first Condor scenery where my home airfield is pretty much in the middle so I have been flying around in it pretty much exclusively for the past few weeks ... and I love it!

I even started adding towers and wind turbines taround my home to match my ICAO map. If you need any help with the more tedious parts, maybe I can help out?


Hello,
Thanks for your kind word about the scenery. :wink:

The East extension can not be done, because it's no just like adding 3x23 km, it's like a new scenery. I have not find myself a solution to the problem mentioned above.
The scenery can be downloaded from here now.
I don't fly in real and only made "North Germany" because the first project, 3 years ago was completely dead, but there where still numerous request on German forum. Now it's time to stop for me, or the scenery will never be finish. There is all time a missing hangar , tower , or turbine ... it's just impossible to put them all .. ..
I would be very happy if my scenery became a "start point" for little German team of scenery builder...!

Patrice,

arneh
Posts: 397
Joined: Mon Nov 16, 2009 11:34 am

Re: North Germany

Postby arneh » Tue Nov 18, 2014 12:48 am

Capricorne wrote:Renaming all the dds was not that difficult, I had just to change all the xx-yy to (xx+12)-yy :D , BUT understanding the scenery.obj structure to move all object is something I have not try for now.

arneh Can you give me some tips for this ? I don't find myself how to tweak the .obj file...


The object file is a binary file with one 152 byte entry for each object in the scenery. The first 8 bytes for each entry is the coordinate (as two float numbers), and by changing this coordinates you can change the position of all objects. I made a little python script which changes the coordinate of all objects in the file.

And if all this is totally greek to you then I can probably convert the object file for you :-)
Image

User avatar
Capricorne
Posts: 207
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: North Germany

Postby Capricorne » Tue Nov 18, 2014 7:09 pm

arneh wrote:The object file is a binary file with one 152 byte entry for each object in the scenery. The first 8 bytes for each entry is the coordinate (as two float numbers), and by changing this coordinates you can change the position of all objects. I made a little python script which changes the coordinate of all objects in the file.

And if all this is totally greek to you then I can probably convert the object file for you :-)


It's not totally Greek or Chinese..but I'm an Old Man and need time to understand.... :wink: not easy to play with hex..still need help:
Image
What you call the "coordinate" is this the x,y value from LE, what the unit? the value looks like meters since the are very near from 23040m, that is the size of terragen tile...?
But if I add 5A00 in hex (=23 040 ) it doesn't work ??
In above screen what is exactly D9DC and F6C6 ?... two float numbers ?? How must I understand this?

Tank's for your offer to help, but I would really like to understand.. :D and do it myself, at least in the future.

Patrice.

arneh
Posts: 397
Joined: Mon Nov 16, 2009 11:34 am

Re: North Germany

Postby arneh » Tue Nov 18, 2014 8:09 pm

Capricorne wrote:What you call the "coordinate" is this the x,y value from LE, what the unit? the value looks like meters since the are very near from 23040m, that is the size of terragen tile...?
But if I add 5A00 in hex (=23 040 ) it doesn't work ??
In above screen what is exactly D9DC and F6C6 ?... two float numbers ?? How must I understand this?


You're on the right track, but you're reading the numbers as integers, not as floating point numbers, which they are. Not sure how you get it in the hex editor you're using, but try the format meny at the top and see if you can get it to display floating point numbers. For reference D9 DC F6 C6 is the floating point representation for -31598.42 (not sure how you got a negative number there, they should be positive...), and 79 55 B3 45 is floating point representation for 5738.68.



The unit is as you said coordinates as the X and Y coordinates you see in the scenery, and it's measured in meters from the corner of the map.

Of course, using a hex editor to manually change the position of every object would be a massive job, so you will need a program to do the job for you.
You do not have the required permissions to view the files attached to this post.
Image

User avatar
Capricorne
Posts: 207
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: North Germany

Postby Capricorne » Thu Nov 20, 2014 12:22 am

Thank you "arneh" for all these explanations..
I get it :D I could now change an object without LE just by editing the.obj.
My problem was that I used my text/html editor to read Hex, was not made for this... it replace my "notepad" for every day work... :) and is very good for this.
Now , with a real hex editor ( have not yet chose between "Hex Workshop" and "010 editor" ) but it's a lot more easy since I can change the hex value directly by typing a Meter value..
Now for North-Germany , the 3 Terragen col. extension ( 3 x 23040 Meter ) to East and moving all existing objects is not done... :roll:
There are many other thing to do.(all Altitude corrections (about 200 airports) + all new ones) are to do..
so...:
My advice to all scenery creators, avoid having to enlarge a scenery that is almost finish. :D

Patrice,
(◑‿◐)

Superphilipp
Posts: 3
Joined: Tue Oct 01, 2013 7:51 pm

Re: North Germany

Postby Superphilipp » Wed Jan 21, 2015 1:19 pm

I'm pretty new at modding Condor, maybe you can help me:

When I'm loading the Scenery in CST, the real textures won't show up, making the placement of objects even more tedious.

Am I missing something?
You do not have the required permissions to view the files attached to this post.

User avatar
EDB
Posts: 536
Joined: Mon Oct 31, 2011 2:17 am
Location: The Netherlands, Europe Continent, Earth Planet, Milky Way Galaxy, Virgo Super Cluster
Contact:

Re: North Germany

Postby EDB » Wed Jan 21, 2015 4:40 pm

Covert the DDS files in the Textures folder to 24 bit BMP and place them in the Working\Textures folder.

Do this with as little files (patches) as needed, because there is a memory limit. When you place too many of these high res files, the visible resolution will be reduced depending on the current CST settings.
SKINS : Team the Netherlands 5.3 and Dutch Nationals 14.10

From the developers : Condor V2 is now in Beta

In the 32-bit world, time won’t go beyond Tuesday 2038-01-19 03:14:07 (UTC). Instead it will return to Friday 1901-12-13 20:45:52 (UTC).

Peet
Posts: 73
Joined: Fri Apr 22, 2005 1:02 am
Location: Netherlands
Contact:

Re: North Germany

Postby Peet » Sun Jan 10, 2016 6:35 pm

What is the latest development of this scenery ?

Peter Jan
Image


Return to “Scenery”

Who is online

Users browsing this forum: No registered users and 2 guests