DSHelper - Current Version 2.6.7.0 - Release date 20.03.2012

Want to organize multiplayer session? This is the right place...

Moderators: Uros, OXO, GR

22
Posts: 2804
Joined: Thu Sep 21, 2006 12:59 am

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby 22 » Mon Jun 28, 2010 10:29 am

yes

User avatar
hitzi
Posts: 1516
Joined: Wed May 18, 2005 11:59 am
Location: Germany
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby hitzi » Tue Jul 13, 2010 8:52 am

Marek, do you use language file within condor?
Image

User avatar
hitzi
Posts: 1516
Joined: Wed May 18, 2005 11:59 am
Location: Germany
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby hitzi » Tue Jul 13, 2010 9:25 am

I tested DSHelper with Condor in german and czech and looks good. Only the logmail stuff gives me a error.

- FTP connection does not work, I get msg about doesnt exist directory also in case when value is blank - (works for me)
- DSH FTP settings do not accept values from *.dsh and always use default values - (have to test this - in my test case i only used dsh settings - there were no main settings)
- e-mail settings does not accept any address (IP or hostname). I use same settings as in previous versions, where these settings worked (i got some other error)
- DSH does not show values like (leader, flown distance etc.) - (works everytime for me)
- DSH optional and reapeating msgs dont work - (works too)
Image

User avatar
macsimc
Posts: 303
Joined: Thu Jul 03, 2008 1:22 pm
Location: Romania
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby macsimc » Mon Aug 30, 2010 6:43 am

Hi Hitzi,
I have a small request for the next version if it will be posibile.

Having the condor server on the network i usually only replace the fpl with the new one.
Doing so, DSHelper doesn't refresh task data when starting the server next time. (Not even if i stop and start the server again from UI). Last week some of the guys got wrong 'taskinfo' until i restarted DSHelper.
Thanks in advance for any help.

User avatar
macsimc
Posts: 303
Joined: Thu Jul 03, 2008 1:22 pm
Location: Romania
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby macsimc » Wed Sep 08, 2010 4:21 pm

Another small question.
All my servers report smaller 'flown distance' to the alternative serverlists. (right now one server reports 38km in official serverlist and 17km in mine and yours, after a few minutes, 119 in official, 64 in alternative).
In DSHelper window the distance is correct (same as in official serverlist)
There is no delay set on the alternative serverlist config.
Any idea why is this happening?

User avatar
hitzi
Posts: 1516
Joined: Wed May 18, 2005 11:59 am
Location: Germany
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby hitzi » Wed Nov 03, 2010 4:15 pm

Hi Mac,

sorry for the late reply. How and when do you replace the fpl?
Image

Bulau
Posts: 539
Joined: Wed May 28, 2008 12:23 am
Location: Ontario, Canada
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby Bulau » Wed Nov 03, 2010 4:34 pm

My DSH is crashing after couple days (Windows "DSH will be shut down..."). CDS remains open but task not running. There are some CDS messages stacked up, I'll try to make note of them if it happens again.

Extra Debug has made a file so large I can't open it...547 mb!

Windows XP SP3
Image
Image

User avatar
hitzi
Posts: 1516
Joined: Wed May 18, 2005 11:59 am
Location: Germany
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby hitzi » Wed Nov 03, 2010 4:57 pm

The extra debug would be great. Can you try to zip it? It's only text so the compression can big big.
Image

User avatar
macsimc
Posts: 303
Joined: Thu Jul 03, 2008 1:22 pm
Location: Romania
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby macsimc » Wed Nov 03, 2010 5:02 pm

hitzi wrote:Hi Mac,
sorry for the late reply. How and when do you replace the fpl?


I replace the fpl's every monday, just by replacing the files via network mapped drive.
Now after this step i have to close all servers and restart DSHelper to fetch the new data. (if not the fpl on the server is ok, but 'taskinfo' command shows the previous task info).

Any ideea on the other issue? It seems that even if i don't have any delay set on the serverlist info, there is a big delay in displaying the km flown in the alternative server lists.

Bulau
Posts: 539
Joined: Wed May 28, 2008 12:23 am
Location: Ontario, Canada
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby Bulau » Wed Nov 03, 2010 5:34 pm

Image

Image

User avatar
hitzi
Posts: 1516
Joined: Wed May 18, 2005 11:59 am
Location: Germany
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby hitzi » Wed Nov 03, 2010 9:10 pm

David, do you have the detailed log (debug log) all the time enabled? If this is the case I think I know what's wrong.

Mac, so you have a list for example with flight1.fpl, flight2.fpl, flight3.fpl and when you replace them you simply upload a new flight1.fpl, flight2.fpl and flight3.fpl and overwrite the old ones, right? I changed the behavior fof the serverlist in dsh a bit. I'll send you a new version of the dsh later this week so you can test if the distance problem is gone.
Image

User avatar
macsimc
Posts: 303
Joined: Thu Jul 03, 2008 1:22 pm
Location: Romania
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby macsimc » Wed Nov 03, 2010 9:39 pm

hitzi wrote: so you have a list for example with flight1.fpl, flight2.fpl, flight3.fpl and when you replace them you simply upload a new flight1.fpl, flight2.fpl and flight3.fpl and overwrite the old ones, right?

exactly,i use this only because i'm lasy to go to the madiacenter and change the tasks manualy :)

hitzi wrote: I changed the behavior fof the serverlist in dsh a bit. I'll send you a new version of the dsh later this week so you can test if the distance problem is gone.

I'm very curious, because i didn't see any other online server with those problem, i thought it may be something on my side.

Bulau
Posts: 539
Joined: Wed May 28, 2008 12:23 am
Location: Ontario, Canada
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby Bulau » Wed Nov 03, 2010 11:34 pm

hitzi wrote:David, do you have the detailed log (debug log) all the time enabled? If this is the case I think I know what's wrong.

I'm not exactly sure...

On Program page, I do NOT have "Write debug informations to a logfile" checked. Although I did for the couple days to generate the file I posted, then turned it off.

On Logfile page, I have "Save DSHelper logfile" checked, but nothing else checked on that page.

But in the DSHelper.ini file, there is this:
[Options]
WriteDebugLogfile=0
DetailedDebugInfos=1
ClearDebugLogfile=0

[Logfile]
Enabled=1
SaveEventsOnly=0
SaveAsCSV=0
DontSaveEmptyLogfiles=0
Image

Image

User avatar
hitzi
Posts: 1516
Joined: Wed May 18, 2005 11:59 am
Location: Germany
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby hitzi » Thu Nov 04, 2010 8:41 am

As long as WriteDebugLogfile is null no debug file is written. The section [Logfile] is used by the Settings/Logfile part of the options and this are just the logfiles from the flight.

If you didn't had the "Write debug informations to a logfile" and "Save detailed informations" option activated when you got the error then it's another problem than I thought.
Image

Bulau
Posts: 539
Joined: Wed May 28, 2008 12:23 am
Location: Ontario, Canada
Contact:

Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010

Postby Bulau » Fri Nov 05, 2010 4:57 pm

Another crash this morning, but I don't have any logging turned on.
Some pics to illustrate the timing:

CrashState.jpg
DSH crashed, CDS still open, but task not runni.
last entry in Server log:
"Dedicated server restarting"
RaceResult and FPL written at 05/11/2010 8:50 AM

RestartDSH1.jpg
DSH reads in stacked Server logs starting from
"I.Crha connected."
and then restarted task

RestartDSH2.jpg
Basically same info

I'm not sure why "Aerotow launching procedure started." is sent twice.
You do not have the required permissions to view the files attached to this post.
Image

Image


Return to “Multiplayer”

Who is online

Users browsing this forum: Bing [Bot] and 6 guests