ASW 15b

Everything related to developing the new gliders for Condor...

Moderators: Uros, OXO, GR

User avatar
bergfalke
Posts: 11
Joined: Mon Nov 14, 2005 1:06 am
Location: Munich, Germany

ASW 15b

Postby bergfalke » Mon Nov 14, 2005 1:37 am

Hello,

today I started the development of an ASW 15b, so I want to show you my first results, to get some feedback...

bf
p.s.: some details are to make, but i think its the right way...
You do not have the required permissions to view the files attached to this post.

griffo
Posts: 154
Joined: Tue Sep 13, 2005 12:09 am
Location: New Zealand, sometimes

Postby griffo » Mon Nov 14, 2005 8:17 am

Very nice!! :D Just like the one I used to fly
Graham
Reg:ZK-GKB
Racing:GA

TimKuijpers
Posts: 3202
Joined: Sun Apr 24, 2005 12:33 am
Location: The Netherlands
Contact:

Postby TimKuijpers » Mon Nov 14, 2005 9:09 am

Wow, imo it looks very nice!
Think positive, flaps negative.

Adriaan
Posts: 7
Joined: Fri May 20, 2005 1:27 pm

Postby Adriaan » Mon Nov 14, 2005 7:05 pm

Nice work!

My dad and I own an ASW 15, so if you need some extra information or closeup pictures, tell me.
Adriaan Oudhuis | www.nnzc.nl |
reg-#: PH-1352
comp-#: A3

User avatar
mosquito
Posts: 1687
Joined: Sun Apr 24, 2005 9:45 pm
Location: Vienna || Munich alias "Mr.NewZealand" :)
Contact:

Postby mosquito » Mon Nov 14, 2005 7:47 pm

sieht schick aus !

sagmal, wo in München fliegst denn du?

User avatar
bergfalke
Posts: 11
Joined: Mon Nov 14, 2005 1:06 am
Location: Munich, Germany

Postby bergfalke » Mon Nov 14, 2005 9:32 pm

Hello,

thank you, it makes me proud that you give me got notes for my work. Today I was able to realize some improvements. Now the plane has its wheels(+wheel doors) and the missing ailerons. The only difficulty is the part between wings and fuselage, but when that's done the outside works are finished. Perhaps I will give you some updates this evening...

to Adriaan:

I can gratulate to your wonderfull plane :wink:
I would like to have a ASW 15, to. When you and your dad anytime in the future take the decision to sell it, you have to send me a message... :D

to Mosquito:

Hallo,
Ich fliege beim AC Dachau in Gröbenried...un du?


bf

User avatar
mosquito
Posts: 1687
Joined: Sun Apr 24, 2005 9:45 pm
Location: Vienna || Munich alias "Mr.NewZealand" :)
Contact:

Postby mosquito » Mon Nov 14, 2005 9:39 pm

bergfalke wrote:Hallo,
Ich fliege beim AC Dachau in Gröbenried...un du?


bf

Königsdorf!

witzig, dachte immer ich wäre der einzige Münchner hier :D

User avatar
bergfalke
Posts: 11
Joined: Mon Nov 14, 2005 1:06 am
Location: Munich, Germany

Postby bergfalke » Mon Nov 14, 2005 9:59 pm

Bis gestern Abend warst du das auch...

Meine aktive Phase begann nämlich erst mit dem Posting der ASW.

User avatar
bergfalke
Posts: 11
Joined: Mon Nov 14, 2005 1:06 am
Location: Munich, Germany

Postby bergfalke » Tue Nov 15, 2005 12:06 am

Now the promised updates...

bf
You do not have the required permissions to view the files attached to this post.

hotelalpha
Posts: 29
Joined: Tue Nov 15, 2005 1:50 pm
Location: northern Germany
Contact:

Postby hotelalpha » Tue Nov 15, 2005 2:14 pm

great work, bf!!! could you tell me which prog you use for modeling? just started modelling myself, but it doesn't really work... well it works anyway but it never looks like i want it to...
thx

henning

User avatar
bergfalke
Posts: 11
Joined: Mon Nov 14, 2005 1:06 am
Location: Munich, Germany

Postby bergfalke » Tue Nov 15, 2005 4:40 pm

Hallo Henning,

ich arbeite mit Cinema 4D. Das mag zwar nicht für die Entwicklung von Flugzeugmodellen gedacht sein, allerdings kenn ich das Programm schon sehr gut, da ich es für meine grafische Arbeit verwende und daher tu ich mich mit Cinema 4D sehr leicht....

grüße
bf

griffo
Posts: 154
Joined: Tue Sep 13, 2005 12:09 am
Location: New Zealand, sometimes

Postby griffo » Tue Nov 15, 2005 7:48 pm

Um, I am probably being very picky, but I seem to remember on the ASW15B I used to fly, that the gear doors were rounded at the front, not square. When closed, the front of both doors formed a half circle. Am I correct, or is my memory starting to fail?? :?
Ooooohhh even managed to find a picture :D Good to see I'm not going senile just yet
You do not have the required permissions to view the files attached to this post.
Graham

Reg:ZK-GKB

Racing:GA

User avatar
bergfalke
Posts: 11
Joined: Mon Nov 14, 2005 1:06 am
Location: Munich, Germany

Postby bergfalke » Tue Nov 15, 2005 8:05 pm

Hey,
thank you, I didn't noticed that, because in my 3D drawing it is square(or it is a little bit unsharp).
Thats the advantage of posting the stuff here in this forum. People find somthing you didn't noticed before....

bf

P.S.: This picture is from "asw15.org", isn't it?

griffo
Posts: 154
Joined: Tue Sep 13, 2005 12:09 am
Location: New Zealand, sometimes

Postby griffo » Tue Nov 15, 2005 8:21 pm

Didn't get that one from ASW15.org, but I am a member there. this one is actually an 18 meter ASW15, so the photo caption says. Not sure if that is true or not.
Graham

Reg:ZK-GKB

Racing:GA

User avatar
StianA
Posts: 126
Joined: Fri Apr 08, 2005 9:52 pm
Location: Norway

Postby StianA » Wed Nov 16, 2005 11:16 am

Great work m8! :D
Yo


Return to “Planes”

Who is online

Users browsing this forum: No registered users and 2 guests